Skip to main content

Calculate Board Feet — Handle Irregular Lumber

Beginner2 hours

Part of project

Board Foot Calculation · Step 4 of 5

Helpful?

In this video

Understand the concept of a 'board foot', which is a unit of volume: a board that is 1 foot by 1 foot by 1 inch thick. When buying rough-sawn lumber, it's typically sold by the board foot, regardless of its dimensions or live edges. To measure an irregularly shaped board, find its longest point for length and its widest point for width. Multiply the length (in feet) by the width (in feet) by the thickness (in inches, converted from quarters to inches) to get the board feet. Always round up to the nearest whole board foot. For example, a board that is 1 foot 2/3 inches long by 2/3 inches wide, even if it has live edges, will be rounded up to 2 board feet if the actual calculation results in just over 1 board foot.

9.5K views349

FAQs

Do I really need a special construction calculator for this, or will a standard one work?

While a standard calculator can perform the multiplication, a construction calculator like the Victor C6000 often simplifies working with fractions and unit conversions (inches to feet), which are common in lumber measurements. It can speed up the process and reduce errors, especially when dealing with many pieces or complex dimensions. However, any calculator can work if you carefully handle the unit conversions manually.

What's the most common mistake beginners make when calculating board feet?

The most frequent error is forgetting to convert all dimensions to feet before multiplying, especially thickness and width which are usually given in inches. Always divide the inch measurements by 12 before multiplying them by the length in feet. Another common mistake is confusing nominal dimensions (what the lumber is called, e.g., '2x4') with actual dimensions (what it actually measures, e.g., 1.5" x 3.5").

Is learning to calculate board feet manually truly necessary, or can I just rely on lumberyard staff?

Learning to calculate board feet yourself is a fundamental skill that empowers you to accurately estimate material costs, compare prices from different suppliers, and verify your lumber orders. While lumberyard staff can help, understanding the calculation ensures you buy exactly what you need, avoid overspending, and catch potential errors. It gives you greater control over your project budget and materials.

How do I handle rough-sawn lumber or pieces with irregular shapes when calculating board feet?

For rough-sawn lumber, use the actual average dimensions rather than nominal ones. Measure the thickness and width at several points along the board and use the most conservative (smallest) usable dimension for your calculation. For truly irregular pieces, you might need to estimate the average usable rectangular volume, or calculate based on the largest rectangle you can mill from the piece, factoring in waste.

Transcript
Hide

Sorry. That's the old way of measuring things. So, if this board up here were, let's see, that would give 4/9. Yes. 4/9 of a "board foot". So, 4/9 plus 2/3 equals 10/9, right? Yes. 10/9 . So, we would have a little more than a "board foot". This brings the total to two "board feet". So , everything is rounded up to the next whole number. Oh, and I need to add one more thing. This one is one and one-eighth inches thick. So, it's actually a little thicker than an inch. And if you're dealing with a slightly more stringent lumber mill, they might add that eighth, bringing the total to another 1/8 of a "board foot". Well, most lumber mills round off. If it's, you know, an inch and a quarter or less, they consider it as 1 inch thick. But if you're aiming for two inches of thickness, then you're talking about two "board feet" per linear measurement. I know this is very confusing. Just understand that if your board is about an inch thick, measure how many square feet you have, that's the number of "board feet," and then round up. And I say round up on each individual board because usually you measure each board individually and then add everything up. So, if I had five of those boards, that would result in 10 "board feet". Even if five times one and one-ninth of "board foot" resulted in five and five-ninths . Therefore, that would be about six "board feet". Hmm, no, it wouldn't be about six plank feet. That would be 10 board-feet because you round each board individually. Hmm, yes. Welcome to the madness of the lumber mill. Okay, Mr. Q asked a legitimate question. What would be the metric equivalent of a plank-foot? Hmm, in the metric world, they sell it by... I think they sell it by the square meter, but I don't know what thickness they measure it by. Yeah, I do n't know. I know it's sold by the square meter, but I don't know what the equivalent thickness is. So, sorry, I've never needed to buy it like that. Hmm, that would be quite interesting. If anyone knows, please let me know. It would be really cool to find out. Hmm, yes. So, whenever you measure something, round up. And it is usually measured by a board . Therefore, each board is rounded and then summed, rounding to the nearest board foot. Hmm, and some lumber mills, hmm, they even round up to the nearest even-numbered board foot , so that it's always an even number. Hmm, and that's one of the things you need to deal with . And no lumberyard will tell you that, because each person who measures, measures in…

Auto-generated transcript. May contain errors.