Skip to main content

Calculate Board Footage — Handle Irregular Lumber

Beginner2 hours

Part of project

Board Foot Calculation · Step 4 of 5

Helpful?

In this video

To calculate the board footage of a piece of lumber, first pull it off the shelf and visually inspect it for straightness and defects like twists, bows, or cups. Use a tape measure to determine its width and length in inches. The thickness will be denoted by its 'quarter' size (e.g., 5/4 = 1.25 inches). Multiply the width (inches) by the length (inches) by the thickness (inches), then divide the total by 144 (since there are 144 cubic inches in a board foot). For instance, an 11.5-inch wide, 57.5-inch long, and 1.25-inch thick board calculates to 5.74 board feet. Hardwood dealers typically round up to the nearest whole number, so this board would be sold as 6 board feet.

122.4K views2.5K

FAQs

Do I really need a special construction calculator for this, or will a standard one work?

While a standard calculator can perform the multiplication, a construction calculator like the Victor C6000 often simplifies working with fractions and unit conversions (inches to feet), which are common in lumber measurements. It can speed up the process and reduce errors, especially when dealing with many pieces or complex dimensions. However, any calculator can work if you carefully handle the unit conversions manually.

What's the most common mistake beginners make when calculating board feet?

The most frequent error is forgetting to convert all dimensions to feet before multiplying, especially thickness and width which are usually given in inches. Always divide the inch measurements by 12 before multiplying them by the length in feet. Another common mistake is confusing nominal dimensions (what the lumber is called, e.g., '2x4') with actual dimensions (what it actually measures, e.g., 1.5" x 3.5").

Is learning to calculate board feet manually truly necessary, or can I just rely on lumberyard staff?

Learning to calculate board feet yourself is a fundamental skill that empowers you to accurately estimate material costs, compare prices from different suppliers, and verify your lumber orders. While lumberyard staff can help, understanding the calculation ensures you buy exactly what you need, avoid overspending, and catch potential errors. It gives you greater control over your project budget and materials.

How do I handle rough-sawn lumber or pieces with irregular shapes when calculating board feet?

For rough-sawn lumber, use the actual average dimensions rather than nominal ones. Measure the thickness and width at several points along the board and use the most conservative (smallest) usable dimension for your calculation. For truly irregular pieces, you might need to estimate the average usable rectangular volume, or calculate based on the largest rectangle you can mill from the piece, factoring in waste.

Transcript
Hide

basically a 1 foot by 1 foot board that's one inch thick is one board foot but it's gonna be hard to find a board that's sized just like that so let's say we're interested in this board the first thing we'll do is we'll pull it down off of the shelf we'll take a look at it will sight it make sure it looks straight make sure it doesn't have any defects like twisting or bowing or cupping and if it looks pretty good then we can go ahead and calculate how many board feet are in it so the measurement is a volumetric measurement so it's gonna be length times width times thickness so she's measured this to be about eleven and a half inches wide and we'll take a look at the length that looks like about 57 and a half inches long and we'll need to know the thickness and we see that it is five quarter so five quarter is inch and a quarter which is 1.25 thick so we'll check the volume here by multiplying these together so it's 11 and a half inches wide by fifty seven and a half inches long and times 1.25 inches thick so we're going to multiply all these together and see what we come up with so we have eight hundred and twenty six and a half cubic inches and the formula is to divide by 144 because there's a hundred and forty-four cubic inches in a board foot so that comes to about five point seven four now of course the hardwood dealers will typically round up and so this board should be a six board foot board and that's what they should

Auto-generated transcript. May contain errors.