Skip to main content

Perform Manual Board Foot Calculation — Measure Lumber Dimensions

Beginner2 hours

Part of project

Board Foot Calculation · Step 1 of 5

Helpful?

In this video

This step details the manual method for calculating board feet. To find the board footage of a piece of wood, you need to measure its width in inches, its length in inches, and its thickness in inches. Once these measurements are obtained, multiply the width by the length by the thickness, and then divide the resulting product by 144. The presenter demonstrates by pointing to the width, length, and thickness of a sample piece of rough-sawn lumber, visually representing the dimensions to be measured.

16.9K views1.1K

FAQs

Do I really need a special construction calculator for this, or will a standard one work?

While a standard calculator can perform the multiplication, a construction calculator like the Victor C6000 often simplifies working with fractions and unit conversions (inches to feet), which are common in lumber measurements. It can speed up the process and reduce errors, especially when dealing with many pieces or complex dimensions. However, any calculator can work if you carefully handle the unit conversions manually.

What's the most common mistake beginners make when calculating board feet?

The most frequent error is forgetting to convert all dimensions to feet before multiplying, especially thickness and width which are usually given in inches. Always divide the inch measurements by 12 before multiplying them by the length in feet. Another common mistake is confusing nominal dimensions (what the lumber is called, e.g., '2x4') with actual dimensions (what it actually measures, e.g., 1.5" x 3.5").

Is learning to calculate board feet manually truly necessary, or can I just rely on lumberyard staff?

Learning to calculate board feet yourself is a fundamental skill that empowers you to accurately estimate material costs, compare prices from different suppliers, and verify your lumber orders. While lumberyard staff can help, understanding the calculation ensures you buy exactly what you need, avoid overspending, and catch potential errors. It gives you greater control over your project budget and materials.

How do I handle rough-sawn lumber or pieces with irregular shapes when calculating board feet?

For rough-sawn lumber, use the actual average dimensions rather than nominal ones. Measure the thickness and width at several points along the board and use the most conservative (smallest) usable dimension for your calculation. For truly irregular pieces, you might need to estimate the average usable rectangular volume, or calculate based on the largest rectangle you can mill from the piece, factoring in waste.