Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Disconnect Plumbing and Venting

With the tank drained, you can now disconnect the water lines, gas line, and venting. For water lines, place a bucket or pan underneath the connections to catch any residual water. Use an adjustable wrench to loosen and remove the hot and cold water supply lines from the top of the water heater. If it's a gas heater, disconnect the gas line at the union fitting. Be prepared for a small amount of residual gas smell, though it should be minimal if the gas was shut off correctly. For gas units, also disconnect the vent pipe (flue) from the draft hood on top of the water heater. This may involve loosening clamps or screws.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Disconnect Plumbing and Venting

With the tank drained, you can now disconnect the water lines, gas line, and venting. For water lines, place a bucket or pan underneath the connections to catch any residual water. Use an adjustable wrench to loosen and remove the hot and cold water supply lines from the top of the water heater. If it's a gas heater, disconnect the gas line at the union fitting. Be prepared for a small amount of residual gas smell, though it should be minimal if the gas was shut off correctly. For gas units, also disconnect the vent pipe (flue) from the draft hood on top of the water heater. This may involve loosening clamps or screws.

Videos for this step

Disconnect Plumbing and Gas LinesDisconnect Old Gas Line and Water ConnectionsDisconnect Water, Vent, and Gas Lines

Tools and Materials

← Project

Water Heater Installation

Step 3 of 13·5.6 hr left

Turn Off Utilities
15 minutes2 items
Drain the Old Water Heater
60 minutes3 items
3
Disconnect Plumbing and Venting
30 minutes3 items
4
Remove Old Water Heater
20 minutes2 items
5
Prepare the Installation Area
30 minutes2 items
6
Position the New Water Heater
20 minutes2 items
7
Connect Water Lines
30 minutes3 items
8
Connect Gas Line and Venting (Gas Heaters)
45 minutes5 items
9
Connect Electrical Wiring (Electric Heaters)
30 minutes3 items
10
Fill the New Water Heater
20 minutes1 items
11
Restore Utilities and Test
60 minutes2 items
12
Install Temperature and Pressure Relief Valve (T&P Valve)
20 minutes3 items
13
Final Inspection and Cleanup
30 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.