Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 9 · Test the new flapper

Flush the toilet and observe if the water stops flowing into the bowl after the tank drains. Check for any leaks around the flapper and flush valve.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 9 · Test the new flapper

Flush the toilet and observe if the water stops flowing into the bowl after the tank drains. Check for any leaks around the flapper and flush valve.

← Project

Toilet Flapper Replacement

Step 9 of 9·5 min left

Turn off water supply
1 minute
Drain the toilet tank
1 minute
Remove excess water from tank
3 minutes
Identify the current flapper
2 minutes
Disconnect the old flapper
2 minutes
Install the new flapper
3 minutes
Connect the chain
3 minutes
Turn water supply back on
1 minute
9
Test the new flapper
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.