Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Drain the toilet tank

Press the flush handle to allow water to drain from the tank into the toilet bowl. Hold the handle down for a few seconds to ensure as much water as possible is removed.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Drain the toilet tank

Press the flush handle to allow water to drain from the tank into the toilet bowl. Hold the handle down for a few seconds to ensure as much water as possible is removed.

← Project

Toilet Flapper Replacement

Step 2 of 9·20 min left

Turn off water supply
1 minute
2
Drain the toilet tank
1 minute
3
Remove excess water from tank
3 minutes
4
Identify the current flapper
2 minutes
5
Disconnect the old flapper
2 minutes
6
Install the new flapper
3 minutes
7
Connect the chain
3 minutes
8
Turn water supply back on
1 minute
9
Test the new flapper
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.