Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 7 · Connect the chain

Attach the chain of the new flapper to the hole or clip on the flush lever arm. Adjust the chain so it has minimal slack but is not taut when the flapper is seated.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Connect the chain

Attach the chain of the new flapper to the hole or clip on the flush lever arm. Adjust the chain so it has minimal slack but is not taut when the flapper is seated.

← Project

Toilet Flapper Replacement

Step 7 of 9·9 min left

Turn off water supply
1 minute
Drain the toilet tank
1 minute
Remove excess water from tank
3 minutes
Identify the current flapper
2 minutes
Disconnect the old flapper
2 minutes
Install the new flapper
3 minutes
7
Connect the chain
3 minutes
8
Turn water supply back on
1 minute
9
Test the new flapper
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.