Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Remove excess water from tank

Use a sponge or a cup to soak up and remove any residual water left in the bottom of the toilet tank. This will prevent spillage during the flapper replacement.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove excess water from tank

Use a sponge or a cup to soak up and remove any residual water left in the bottom of the toilet tank. This will prevent spillage during the flapper replacement.

← Project

Toilet Flapper Replacement

Step 3 of 9·19 min left

Turn off water supply
1 minute
Drain the toilet tank
1 minute
3
Remove excess water from tank
3 minutes
4
Identify the current flapper
2 minutes
5
Disconnect the old flapper
2 minutes
6
Install the new flapper
3 minutes
7
Connect the chain
3 minutes
8
Turn water supply back on
1 minute
9
Test the new flapper
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.