Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 1 · Turn off water supply

Locate the water supply valve, usually found on the wall behind the toilet base. Turn the handle clockwise until it is fully closed to shut off the water flow to the toilet tank.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Turn off water supply

Locate the water supply valve, usually found on the wall behind the toilet base. Turn the handle clockwise until it is fully closed to shut off the water flow to the toilet tank.

← Project

Toilet Flapper Replacement

Step 1 of 9·21 min left

1
Turn off water supply
1 minute
2
Drain the toilet tank
1 minute
3
Remove excess water from tank
3 minutes
4
Identify the current flapper
2 minutes
5
Disconnect the old flapper
2 minutes
6
Install the new flapper
3 minutes
7
Connect the chain
3 minutes
8
Turn water supply back on
1 minute
9
Test the new flapper
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.