Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Allow Adhesive to Cure

Once the transition strip is installed and any excess adhesive is cleaned up, it is important to allow the adhesive to cure properly. This usually takes several hours to a full day, depending on the product used. Avoid walking on or placing any heavy objects on the transition strip during this curing period to ensure a strong and permanent bond.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Allow Adhesive to Cure

Once the transition strip is installed and any excess adhesive is cleaned up, it is important to allow the adhesive to cure properly. This usually takes several hours to a full day, depending on the product used. Avoid walking on or placing any heavy objects on the transition strip during this curing period to ensure a strong and permanent bond.

Videos for this step

Post-Installation Care (Glue Down)Secure and Cure Transition StripCure Adhesive and Final Inspection

← Project

How to Install a Floor Transition Strip at the Bottom of the Stairs

Step 7 of 7·24 hr left

Remove Existing Transition Strip
15 minutes3 items
Clean the Area
20 minutes5 items
Measure and Cut Transition Strip
25 minutes6 items
Dry Fit the Transition Strip
10 minutes1 items
Install the Transition Strip
30 minutes7 items
Clean Up Excess Adhesive
5 minutes2 items
7
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.