Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Remove Existing Transition Strip

If there is an existing transition strip at the bottom of the stairs, it needs to be removed before installing the new one. Use a pry bar to carefully lift the edge of the old strip. A putty knife can be used to gently work under the strip to loosen any adhesive or nails without damaging the underlying flooring or subfloor. Once loosened, pull the old strip free.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Remove Existing Transition Strip

If there is an existing transition strip at the bottom of the stairs, it needs to be removed before installing the new one. Use a pry bar to carefully lift the edge of the old strip. A putty knife can be used to gently work under the strip to loosen any adhesive or nails without damaging the underlying flooring or subfloor. Once loosened, pull the old strip free.

Videos for this step

Remove Old Transition StripRemove Floor Transition StripsRemove Tack Strips

Tools and Materials

← Project

How to Install a Floor Transition Strip at the Bottom of the Stairs

Step 1 of 7·25.8 hr left

1
Remove Existing Transition Strip
15 minutes3 items
2
Clean the Area
20 minutes5 items
3
Measure and Cut Transition Strip
25 minutes6 items
4
Dry Fit the Transition Strip
10 minutes1 items
5
Install the Transition Strip
30 minutes7 items
6
Clean Up Excess Adhesive
5 minutes2 items
7
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.