Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Clean the Area

Once the old transition strip is removed, it's crucial to prepare the surface for the new installation. Sweep or vacuum the area to remove loose debris. Use a scraper or putty knife to remove any remaining adhesive, caulk, or nail heads. For stubborn adhesive, a mild solvent might be necessary, followed by a thorough cleaning with a damp cloth. The surface must be clean and dry for proper adhesion.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Clean the Area

Once the old transition strip is removed, it's crucial to prepare the surface for the new installation. Sweep or vacuum the area to remove loose debris. Use a scraper or putty knife to remove any remaining adhesive, caulk, or nail heads. For stubborn adhesive, a mild solvent might be necessary, followed by a thorough cleaning with a damp cloth. The surface must be clean and dry for proper adhesion.

Videos for this step

Clean Installation AreaPrepare the Floor Surface for AdhesionClean and Prepare the Recess

Tools and Materials

← Project

How to Install a Floor Transition Strip at the Bottom of the Stairs

Step 2 of 7·25.5 hr left

Remove Existing Transition Strip
15 minutes3 items
2
Clean the Area
20 minutes5 items
3
Measure and Cut Transition Strip
25 minutes6 items
4
Dry Fit the Transition Strip
10 minutes1 items
5
Install the Transition Strip
30 minutes7 items
6
Clean Up Excess Adhesive
5 minutes2 items
7
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.