Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Prepare Subfloor and Drain Pipe

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the pan from the alcove. Based on the drain location you marked, ensure the drain pipe in the floor is positioned correctly. You will likely need to cut the waste pipe to the correct height. For a solvent-weld drain, the top of the pipe should typically be about 1/2 inch below the top of the subfloor, allowing the drain assembly to slide over it. Use a PVC/ABS pipe cutter or a hacksaw for a clean cut. After cutting, place a piece of tape over the pipe opening to prevent mortar and debris from falling in. Give the subfloor one final cleaning with a shop vacuum.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Prepare Subfloor and Drain Pipe

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the pan from the alcove. Based on the drain location you marked, ensure the drain pipe in the floor is positioned correctly. You will likely need to cut the waste pipe to the correct height. For a solvent-weld drain, the top of the pipe should typically be about 1/2 inch below the top of the subfloor, allowing the drain assembly to slide over it. Use a PVC/ABS pipe cutter or a hacksaw for a clean cut. After cutting, place a piece of tape over the pipe opening to prevent mortar and debris from falling in. Give the subfloor one final cleaning with a shop vacuum.

Videos for this step

Drain Pipe Repair and Flange InstallationPlan and Drill Drain HolesInstall and Secure Drain Body

Tools and Materials

← Project

How to Install and Level a Shower Pan Base

Step 4 of 9·1.6 hr left

Prepare the Installation Area
60 mins12 itemsAdvanced
Install the Drain Fitting
15 mins7 itemsIntermediate
Dry-Fit and Mark the Pan
20 mins4 itemsIntermediate
4
Prepare Subfloor and Drain Pipe
15 mins4 itemsAdvanced
5
Mix and Apply Mortar
20 mins9 items
6
Set and Level the Pan
15 mins4 items
7
Connect the Waste Drain
5 mins5 itemsAdvanced
8
Secure Flanges to Studs
15 mins3 itemsIntermediate
9
Allow Mortar to Cure
24 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.