Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Test the System

Once the backfilling is complete and the discharge is connected, test the system. Pour water into the beginning of the French drain (or into a designated inlet if you created one). Observe if water flows freely through the pipe and discharges effectively at the end. Check for any areas where water might be pooling or not draining as expected.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Test the System

Once the backfilling is complete and the discharge is connected, test the system. Pour water into the beginning of the French drain (or into a designated inlet if you created one). Observe if water flows freely through the pipe and discharges effectively at the end. Check for any areas where water might be pooling or not draining as expected.

Videos for this step

System Testing and VerificationTest SystemTest the French Drain

Tools and Materials

← Project

French Drain Installation

Step 10 of 10·30 min left

Mark the Drain Path
60 minutes4 items
Excavate the Trench
480 minutes5 items
Lay Landscape Fabric
120 minutes2 items
Add Base Gravel Layer
180 minutes3 items
Position the Perforated Pipe
60 minutes2 items
Fill with Gravel
240 minutes3 items
Wrap with Landscape Fabric
60 minutes2 items
Backfill the Trench
180 minutes3 items
Connect to Discharge Point
30 minutes2 items
10
Test the System
30 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.