Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 6 · Inspect and Replace O-Rings and Seals

Examine the O-rings and rubber seals on the old cartridge and within the faucet body. If they appear cracked, brittle, or flattened, replace them. It's often best to replace the entire cartridge if O-rings are worn, as this is a common source of leaks. You can also clean any mineral deposits from the cartridge seat in the faucet body.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Inspect and Replace O-Rings and Seals

Examine the O-rings and rubber seals on the old cartridge and within the faucet body. If they appear cracked, brittle, or flattened, replace them. It's often best to replace the entire cartridge if O-rings are worn, as this is a common source of leaks. You can also clean any mineral deposits from the cartridge seat in the faucet body.

← Project

Faucet Repair

Step 6 of 10·28 min left

Turn Off Water Supply
5 minutes
Drain Faucet Lines
2 minutes
Remove Faucet Handle
5 minutes
Remove Escutcheon and Cap
5 minutes
Remove Faucet Cartridge
10 minutes
6
Inspect and Replace O-Rings and Seals
10 minutes
7
Install New Cartridge
5 minutes
8
Reassemble Faucet Components
5 minutes
9
Turn Water Supply Back On
3 minutes
10
Test for Leaks
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.