Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Remove Faucet Handle

Look for a small decorative cap or plug on the handle. Pry this cap off using a flathead screwdriver or a utility knife to reveal a set screw. Loosen the set screw with an Allen wrench or screwdriver (depending on the screw type) and lift the handle straight up and off the faucet body.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove Faucet Handle

Look for a small decorative cap or plug on the handle. Pry this cap off using a flathead screwdriver or a utility knife to reveal a set screw. Loosen the set screw with an Allen wrench or screwdriver (depending on the screw type) and lift the handle straight up and off the faucet body.

← Project

Faucet Repair

Step 3 of 10·48 min left

Turn Off Water Supply
5 minutes
Drain Faucet Lines
2 minutes
3
Remove Faucet Handle
5 minutes
4
Remove Escutcheon and Cap
5 minutes
5
Remove Faucet Cartridge
10 minutes
6
Inspect and Replace O-Rings and Seals
10 minutes
7
Install New Cartridge
5 minutes
8
Reassemble Faucet Components
5 minutes
9
Turn Water Supply Back On
3 minutes
10
Test for Leaks
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.