Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Drain Faucet Lines

With the water supply turned off, open the single handle of the faucet to the middle position (both hot and cold) to allow any residual water in the lines to drain out. Leave the handle in the open position.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Drain Faucet Lines

With the water supply turned off, open the single handle of the faucet to the middle position (both hot and cold) to allow any residual water in the lines to drain out. Leave the handle in the open position.

← Project

Faucet Repair

Step 2 of 10·50 min left

Turn Off Water Supply
5 minutes
2
Drain Faucet Lines
2 minutes
3
Remove Faucet Handle
5 minutes
4
Remove Escutcheon and Cap
5 minutes
5
Remove Faucet Cartridge
10 minutes
6
Inspect and Replace O-Rings and Seals
10 minutes
7
Install New Cartridge
5 minutes
8
Reassemble Faucet Components
5 minutes
9
Turn Water Supply Back On
3 minutes
10
Test for Leaks
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.