Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 10 · Test for Leaks

Turn the faucet handle on and off, testing both hot and cold water flow. Inspect around the handle, spout, and under the sink at the valve connections for any drips or leaks. If leaks persist, you may need to re-examine the cartridge installation or check for other worn parts.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Test for Leaks

Turn the faucet handle on and off, testing both hot and cold water flow. Inspect around the handle, spout, and under the sink at the valve connections for any drips or leaks. If leaks persist, you may need to re-examine the cartridge installation or check for other worn parts.

← Project

Faucet Repair

Step 10 of 10·5 min left

Turn Off Water Supply
5 minutes
Drain Faucet Lines
2 minutes
Remove Faucet Handle
5 minutes
Remove Escutcheon and Cap
5 minutes
Remove Faucet Cartridge
10 minutes
Inspect and Replace O-Rings and Seals
10 minutes
Install New Cartridge
5 minutes
Reassemble Faucet Components
5 minutes
Turn Water Supply Back On
3 minutes
10
Test for Leaks
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.