Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Remove Escutcheon and Cap

After removing the handle, you will see an escutcheon (a decorative dome-shaped piece). Unscrew this by hand or with pliers if it's tight. Beneath the escutcheon, there may be a retaining nut or cap that holds the cartridge in place. Unscrew this part, which might require a wrench or pliers.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Remove Escutcheon and Cap

After removing the handle, you will see an escutcheon (a decorative dome-shaped piece). Unscrew this by hand or with pliers if it's tight. Beneath the escutcheon, there may be a retaining nut or cap that holds the cartridge in place. Unscrew this part, which might require a wrench or pliers.

← Project

Faucet Repair

Step 4 of 10·43 min left

Turn Off Water Supply
5 minutes
Drain Faucet Lines
2 minutes
Remove Faucet Handle
5 minutes
4
Remove Escutcheon and Cap
5 minutes
5
Remove Faucet Cartridge
10 minutes
6
Inspect and Replace O-Rings and Seals
10 minutes
7
Install New Cartridge
5 minutes
8
Reassemble Faucet Components
5 minutes
9
Turn Water Supply Back On
3 minutes
10
Test for Leaks
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.