Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Install Drainage and Gravel Base

After excavating, add a layer of coarse gravel (e.g., 3/4-inch crushed stone) to the bottom of the excavated area, about 4-6 inches deep. This layer is crucial for proper drainage, preventing water from pooling under the steps and causing frost heave or erosion. Compact this gravel layer thoroughly using a tamper. Add a thinner layer (about 1-2 inches) of smaller gravel or coarse sand on top of the compacted coarse gravel.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Install Drainage and Gravel Base

After excavating, add a layer of coarse gravel (e.g., 3/4-inch crushed stone) to the bottom of the excavated area, about 4-6 inches deep. This layer is crucial for proper drainage, preventing water from pooling under the steps and causing frost heave or erosion. Compact this gravel layer thoroughly using a tamper. Add a thinner layer (about 1-2 inches) of smaller gravel or coarse sand on top of the compacted coarse gravel.

Videos for this step

Install and Compact Gravel BaseAdd and Compact Gravel BaseAdding and Compacting Gravel Base

Tools and Materials

← Project

How to Build Stone Steps in a Garden

Step 2 of 6·13 hr left

Mark and Excavate the Garden Stone Steps Area
240 minutes7 items
2
Install Drainage and Gravel Base
180 minutes5 items
3
Prepare the Sand Setting Bed
60 minutes4 items
4
Select and Lay the Stone Treads
300 minutes6 items
5
Install Risers and Fill Gaps
150 minutes5 items
6
Finishing Touches and Site Cleanup
90 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.