Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Leak Test Refrigerant Lines

After charging the system with refrigerant, use a leak detector (electronic or soap bubble method) to thoroughly check all refrigerant line connections, joints, and service ports for any signs of refrigerant leaks. Repair any leaks found before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Leak Test Refrigerant Lines

After charging the system with refrigerant, use a leak detector (electronic or soap bubble method) to thoroughly check all refrigerant line connections, joints, and service ports for any signs of refrigerant leaks. Repair any leaks found before proceeding.

Videos for this step

Test the Connection for LeaksRelease Pre-Charged Refrigerant and Check for LeaksRelease Refrigerant and Check for Leaks

Tools and Materials

← Project

Air Conditioner Installation

Step 7 of 10·3.5 hr left

Prepare the Outdoor Unit Location
60 minutes4 items
Mount the Outdoor Unit
30 minutes3 items
Install the Evaporator Coil (Indoor Unit)
120 minutes6 items
Run Refrigerant Lines and Electrical Wiring
180 minutes8 items
Connect Electrical Power to the Outdoor Unit
90 minutes7 items
Evacuate and Charge Refrigerant Lines
120 minutes7 items
7
Leak Test Refrigerant Lines
45 minutes4 items
8
Connect Indoor Unit Electrical Power
60 minutes5 items
9
Perform System Startup and Testing
60 minutes4 items
10
Final Checks and Commissioning
45 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.