Skip to main content

Draw Basement Staircase Sections — Create a Detailed Layout Plan

Beginner4 hours

Part of project

How to Plan an L-Shaped Staircase Layout · Step 5 of 6

Helpful?

In this video

Repeat the process for the basement staircase. Select the rightmost vertical red line of the basement to first-floor section. Right-click and select 'Divide'. This time, divide the line into '18 segments' (each 6.7083 inches). Draw the first tread (10.25 inches) and riser (6.7083 inches) from the bottom-right corner. Use 'Move' ('M') with 'Control' (copy) and input '*8' to create 8 more copies of the tread/riser segment. Connect the nose points with a diagonal line and draw a perpendicular line (11 inches) from the lowest nose point to close the stringer. Clean up extra lines with the 'Eraser' tool ('E'). Double-click the stringer outline, press 'G' to create a component, name it 'Basement Stringer Top', and click 'Create'. Draw a 12-inch landing from the end of this stringer. Copy the 'Basement Stringer Top' component, right-click and 'Make Unique'. Flip it horizontally using 'Scale' ('S') with a '-1' value. Position it at the end of the landing. Edit the unique component to remove any redundant tread/riser (as it's the last step). Connect the remaining nose points with a line and draw a perpendicular line (11 inches). This completes the basic layout of the U-shaped stairs for both levels.

9.1K views323
Transcript
Hide

into a bunch of pieces that are all divided up into 18 equal pieces line find that first segment over 10.25 for my tread i'm going to hit the up arrow to lock this in the vertical axis and i'm going to find that green dot which represents the end of that next segment boom select my tread m for move control for copy get that green dot which tells you that you are on the end of the line move it to the bottom of that rise shift 8 for the asterisk hit 10 now we've repeated that action 10 times let's do the same thing for the rise m for move control for copy move it down shift 8 for asterisk 10 and i believe on this unit i want 10 rises also wait yes so i'm going to count that out 1 2 3 4 5 6 7 8 9 10 e for erase get rid of those we will bring this line over connect the nose to nose which will give you a line that follows the angle of the staircase that light blue dot represents the midpoint l for line pink line tells you that you are perpendicular to that line you just selected type in 11 inches now again draw a line over the top of this line that tells sketchup the program where you're trying to orient things now select that point and it'll give you that pink line option to draw a line perpendicular e for eraser clean it up select the face double click selects all the bounding edges hit g for component and we'll call this basement stringer top

Auto-generated transcript. May contain errors.