Skip to main content

Sketch 2D Floor Plan with Dimensions — Create a Detailed Layout Plan

Beginner4 hours

Part of project

How to Plan an L-Shaped Staircase Layout · Step 5 of 6

Helpful?

In this video

Start by sketching a rectangle representing the overall footprint of the staircase. Divide this into two flights and a central landing. Mark the tread depth of each step as 30 cm, leading to a total length of 2.40 meters per flight (8 steps x 30 cm). The width of the stairs should be 1.10 meters. Calculate the landing length by doubling the stair width, resulting in 2.20 meters. Also, mark the riser height at 20 cm for 16 steps total to reach a height of 3.20 meters, with a landing at 1.60 meters.

546 views28
Transcript
Hide

In this video, we are going to learn how to draw a U-shaped staircase in isometric view. Uh the first step is to draw the 2D floor plan of the stairs. So each flight consists of uh eight steps with a thread depth of uh 30 cm resulting in a total length of 2 m 40 cm for each flight. Uh if you consider the stair uh width to be 110 cm then the landing length will be uh twice the width of the stairs. So it will be 2 m and 20 cm. We assume that uh to reach from the ground level to the first floor level, we need to climb about uh 16 steps each with a riser height of uh 20 cm reaching a total height of 3 m 20 cm. These calculations are very important for accurately drawing the staircase. So just pay attention to this stage.

Auto-generated transcript. May contain errors.