Skip to main content

Measure Total Rise and Account for Flooring — Measure Existing Floor Heights

Beginner4 hours

Part of project

How to Plan an L-Shaped Staircase Layout · Step 1 of 6

Helpful?

In this video

The 'total rise' is the vertical distance from the finished floor of the lower level (e.g., concrete basement floor) to the top of the finished floor of the upper level (e.g., subfloor with hardwood or vinyl plank). The presenter demonstrates measuring this distance using a tape measure. It's critical to factor in the thickness of any finished flooring materials at both the top and bottom. For instance, if the upper floor has hardwood (3/4 inch) and the lower floor has carpet (which is typically installed after the staircase is built and would be considered level with the concrete), the measurement should be adjusted. In the presenter's case, both floors will have vinyl plank, so the thickness difference is negligible. The measurement taken was 103 5/8 inches from the concrete to the top of the OSB subfloor. Adding 3/8 inch for the vinyl plank on the subfloor results in a total rise of 104 inches.

9.2K views429
Transcript
Hide

know to figure out the whole layout is we need to know the total rise so that's right from the floor back here that's right from right down here on the floor up to the top of whatever your uh subfloor is going to be okay so that's your total rise now your flooring can come into play as well here um if you've got uh say hardwood up there which is extra 3/4 of an inch and carpet down here in the basement uh those two will probably end up working out pretty equal so you don't need to make any deductions for that but let's say you have hardwood up there and vinyl plank or laminate in the basement that's only a quart of an inch thick well you've got a half inch difference so you need to uh calculate what that difference will be so top of finished floor down here to top a finished floor up there okay in my case I'm going to have vinyl plank I'm going to have the same flooring in the basement as I am up there so my total distance uh from concrete to top of the underlay that's going to be under that flooring up there is going to be my total rise okay so I'm going to measure that maybe I'll take you with me see if we can get you a little closer okay so I'm going to drop my uh tape measure right down to the top of the concrete floor and I'm going to measure from basically underside of finished floor at the basement to underside of finished floor on the main floor okay so that means I'm going to have 38 of an inch more on top of this uh 3/4 inch plywood here because that'll be my subflooring under the under the flooring upstairs so I've got when I'm sitting there I've got 103 and 58 to the top of this plywood so when I add my 38 for my subflooring that's going to go under my floor my finished floor that'll give me 104 in total rise I'll just double check it on this side it should be the

Auto-generated transcript. May contain errors.