Skip to main content

Anchor Stringer Base Plate to Concrete — Secure Bottom of Stringers

Intermediate5 mins

Part of project

How to Build Basement Stairs · Step 5 of 9

Helpful?

In this video

Position a 2x8 pressure-treated lumber board (cut to the correct width) underneath the bottom notches of the stringers, resting on the concrete landing. Ensure it's perfectly level and aligned with the stringers. This serves as a base plate. Using an impact driver with a 1/2-inch concrete drill bit, drill through the base plate and deeply into the concrete. After drilling, use a shop vac to remove all concrete dust and debris from the holes to ensure a strong grip. Insert 1/2-inch wedge anchors into the drilled holes, hammering them down fully. Use a ratchet to tighten the wedge anchors as much as possible, firmly securing the base plate to the concrete. This provides crucial stability and prevents movement of the stair stringers at the base.

75.6K views823
Transcript
Hide

DeckWise decking spacers. As I descend to the last step, I realize that I probably should have secured the bottom support plate to the concrete before I started installing the steps and risers. But it wouldn't hurt to do it at this stage. To do this, I take a screwdriver with a half-inch concrete drill bit and drill a hole through the backing plate directly into the concrete. Just make sure you vacuum up as much concrete dust as possible before moving on to the wedge anchors. These are half-inch wedge anchors that are designed specifically for this type of fastening and are extremely strong. After I drive the anchor all the way in . I take the ratchet wrench and tighten it as hard as I can. Then I move to the other side. I follow the same process. And now this support plate will definitely not move anywhere. Keep in mind that this support plate is not only needed for structural strength , it also protects

Auto-generated transcript. May contain errors.