Skip to main content

Calculate Final Total Rise — Document All Measurements

Beginner2 hours

Part of project

How to Measure Basement Stairs with Uneven Steps · Step 6 of 6

Helpful?

In this video

Once the true level horizontal line is established (as described in the previous step), measure the vertical distance from this level line down to the actual finished surface of the lower landing or ground where the stairs will terminate. Compare this measurement to what a direct measurement might have been. If there's a difference between the level line's height at the lower termination point and the actual lower landing height, subtract or add that difference to ensure your total rise measurement is precise. For example, if the lower landing is 2 inches lower than the level line's projection, add 2 inches to the initial vertical measurement from the level line to the upper landing. This correctly adjusted total rise is then used to calculate the individual riser and tread dimensions needed for accurate stair stringer layout and eventual cutting.

702 views23
Transcript
Hide

a nice level line on the wall that you can measure from. That way if the landing is too high you're going to know about it and be able to make the adjustments or if it's lower you're going to be able to make the adjustments and you can simply make the adjustments by measuring from either the top or the bottom of a straight edge like a 2 by 4 and then subtract or add the difference to this measurement here to get the overall total rise. You need to calculate the individual risers so that you can lay out your stringer correctly. And thanks for watching.

Auto-generated transcript. May contain errors.