Skip to main content

Measure and Evaluate Stair Riser Uniformity — Inspect the Stairs for Visible Unevenness

Beginner2 hours

Part of project

How to Measure Basement Stairs with Uneven Steps · Step 1 of 6

Helpful?

In this video

Carefully inspect the height of each stair riser, from the top landing down to the basement floor. The video explicitly states that "the height of each step is not consistent it can create a trip hazard." Use a tape measure to check if all risers are within a very tight tolerance (typically 3/8 inch total variation from highest to lowest riser in a flight, but ideally perfectly consistent). Pay particular attention to the first and last steps, as these are most often affected by varying floor thicknesses at the upper and lower levels. If the flooring at the bottom of the stairs is different (e.g., a thick 3/4-inch hardwood floor is installed where a thinner floor once was), this will directly alter the height of the bottom-most riser, potentially making it inconsistent with the rest and creating a tripping hazard.

43 views