Skip to main content

Level and Align Installed Riser — Check for Plumb and Level of Treads and Risers

Beginner2 hours

Part of project

How to Measure Basement Stairs with Uneven Steps · Step 4 of 6

Helpful?

In this video

After a riser has been installed, use a spirit level to check its straightness across its length. If there's a slight gap or unevenness (e.g., a 1/16th gap as mentioned in the video), gently tap the riser with a hammer until the bubble on the level indicates it is perfectly straight and flush. This ensures the top edge of the riser is aligned correctly. The presenter also mentions that the riser will eventually be screwed from the backside to further secure it to the tread, but this step focuses on leveling the top edge.

75.9K views1.5K
Transcript
Hide

installation so now here I want to check after I nail my Riser on I've got my level on here I've got a solid 16th Gap I want to go ahead and tap that out and get this nice and straight the whole way across now we will be screwing the Riser from the back side as well that'll draw it close to the tread but we also want to ensure that this top Edge is straight so another step that's very important use a level and get that nice and straight all the way across

Auto-generated transcript. May contain errors.