Skip to main content

Minimum Tread Depth and Landing Dimensions — Determine Tread Depth and Landing Dimensions

Intermediate4 mins

Part of project

How to Lay Out Winder Stairs · Step 3 of 7

Helpful?

In this video

Understand the minimum tread depth and landing dimensions. The minimum tread depth must be 10 inches (older codes allowed 9 inches). For stair landings, their depth must be equal to or larger than the width of the stairway itself. This rule applies to both the top and bottom landings. While historical codes sometimes specified a 36-inch minimum for landings, the current 2021 Residential Building Code emphasizes that the landing depth should match or exceed the stair width. It is advisable to consult your local building department if you have any questions or prefer alternative designs.

2.7K views65
Transcript
Hide

Next up the minimum tread depth will be ten inches. However, when I first started working, it was nine inches and the vertical riser height was eight inches. Next up, let's go ahead and take a look at the minimum width or depth of the stair landing itself. And according to these building codes, the depth of the stair tread will need to be the same or larger than the width of the stairway. And that would be the same for the top or the bottom. So the depth of this landing here will need to be the width of this or larger. And this was something a long time ago that used to have a 36 inch minimum, which would be the same as the minimum width for a stairway. However, they have changed the verbiage on it. So again, these building codes are from the 2021 residential building code book. And for the most part, these are building codes I like. However, if you do not like them, then check with your local building department to see if they have different building codes that might work better for your project or for you personally.

Auto-generated transcript. May contain errors.