Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Measure and Cut Treads

Measure the depth of each stair (from the front edge of the existing tread to the riser) and the width of each stair. If the stairs are not perfectly square, measure the width at the front and back and use the larger measurement for accuracy. Transfer these measurements to your chosen tread material. Use a speed square or combination square to mark cut lines. Cut the treads using a circular saw or miter saw, ensuring clean, straight edges. Double-check measurements before cutting.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Measure and Cut Treads

Measure the depth of each stair (from the front edge of the existing tread to the riser) and the width of each stair. If the stairs are not perfectly square, measure the width at the front and back and use the larger measurement for accuracy. Transfer these measurements to your chosen tread material. Use a speed square or combination square to mark cut lines. Cut the treads using a circular saw or miter saw, ensuring clean, straight edges. Double-check measurements before cutting.

Videos for this step

Measure and Cut TreadsMeasure and Cut New TreadsMeasure and Cut First Tread

← Project

Stair Treads

Step 3 of 6·9.5 hr left

Remove Old Treads
60 minutes
Prepare Stair Structure
90 minutes
3
Measure and Cut Treads
120 minutes
4
Dry Fit Treads
30 minutes
5
Install New Treads
180 minutes
6
Finish New Treads
240 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.