Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 7 · Install New Thermostat Mounting Plate

Position the new mounting plate over the existing wire opening. Use a level to ensure it is straight on the wall. Mark the screw hole locations on the wall. If the screw holes do not align with the existing ones, you may need to drill new holes. Use the provided screws and wall anchors (if necessary) to secure the mounting plate firmly to the wall.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Install New Thermostat Mounting Plate

Position the new mounting plate over the existing wire opening. Use a level to ensure it is straight on the wall. Mark the screw hole locations on the wall. If the screw holes do not align with the existing ones, you may need to drill new holes. Use the provided screws and wall anchors (if necessary) to secure the mounting plate firmly to the wall.

← Project

Smart Thermostat Installation

Step 7 of 12·1.2 hr left

Check Thermostat Compatibility
30 minutes
Turn Off Power to HVAC System
5 minutes
Remove the Old Thermostat Faceplate
2 minutes
Photograph Existing Wiring
3 minutes
Label Wires
5 minutes
Disconnect Wires and Remove Old Thermostat Base
5 minutes
7
Install New Thermostat Mounting Plate
10 minutes
8
Connect Wires to the New Thermostat
15 minutes
9
Attach the New Thermostat Faceplate
5 minutes
10
Restore Power to HVAC System
2 minutes
11
Configure Smart Thermostat Settings
30 minutes
12
Test Heating and Cooling Systems
10 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.