Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Clean the Sprayer

Flush the intake tube and spray gun with the appropriate cleaning solvent (water for latex paints, mineral spirits for oil-based paints). Run the solvent through the sprayer until it dispenses clear. Disassemble the spray gun and clean all parts meticulously with a brush and solvent. Reassemble the sprayer once all components are clean and dry.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Clean the Sprayer

Flush the intake tube and spray gun with the appropriate cleaning solvent (water for latex paints, mineral spirits for oil-based paints). Run the solvent through the sprayer until it dispenses clear. Disassemble the spray gun and clean all parts meticulously with a brush and solvent. Reassemble the sprayer once all components are clean and dry.

Videos for this step

Clean the Paint SprayerClean Sprayer and Work AreaClean the Sprayer Components

Tools and Materials

← Project

Painting

Step 8 of 9·1.3 hr left

Select and Prepare Paint Sprayer
60 minutes2 items
Prepare the Paint
30 minutes4 items
Load the Sprayer
15 minutes2 items
Test Spray Pattern
10 minutes2 items
Mask and Protect Surfaces
45 minutes3 items
Apply Paint
120 minutes2 items
Apply Second Coat (if needed)
120 minutes2 items
8
Clean the Sprayer
60 minutes4 items
9
Remove Masking and Inspect
20 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.