Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Load the Sprayer

Place the intake tube into the bucket of strained and thinned paint. Engage the sprayer's priming mechanism to draw paint into the system. Continue priming until paint flows smoothly from the sprayer's return line or hose, indicating the system is full and purged of air.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Load the Sprayer

Place the intake tube into the bucket of strained and thinned paint. Engage the sprayer's priming mechanism to draw paint into the system. Continue priming until paint flows smoothly from the sprayer's return line or hose, indicating the system is full and purged of air.

Videos for this step

Prime the Sprayer Unit (Purge Air from Machine)Priming the Sprayer with PaintLoad Paint into Sprayer

Tools and Materials

← Project

Painting

Step 3 of 9·6.5 hr left

Select and Prepare Paint Sprayer
60 minutes2 items
Prepare the Paint
30 minutes4 items
3
Load the Sprayer
15 minutes2 items
4
Test Spray Pattern
10 minutes2 items
5
Mask and Protect Surfaces
45 minutes3 items
6
Apply Paint
120 minutes2 items
7
Apply Second Coat (if needed)
120 minutes2 items
8
Clean the Sprayer
60 minutes4 items
9
Remove Masking and Inspect
20 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.