Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test Spray Pattern

Point the spray gun at a piece of cardboard or scrap wood in a well-ventilated area. Squeeze the trigger and observe the spray pattern. It should be consistent and fan-shaped, with no sputtering, dripping, or unevenness. Adjust the pressure, tip size, or paint thinning as needed based on the test results.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test Spray Pattern

Point the spray gun at a piece of cardboard or scrap wood in a well-ventilated area. Squeeze the trigger and observe the spray pattern. It should be consistent and fan-shaped, with no sputtering, dripping, or unevenness. Adjust the pressure, tip size, or paint thinning as needed based on the test results.

Videos for this step

Testing Spray Pattern and Adjusting PressurePractice Spraying TechniquesAdjust Spray Pressure and Test Pattern

Tools and Materials

← Project

Painting

Step 4 of 9·6.3 hr left

Select and Prepare Paint Sprayer
60 minutes2 items
Prepare the Paint
30 minutes4 items
Load the Sprayer
15 minutes2 items
4
Test Spray Pattern
10 minutes2 items
5
Mask and Protect Surfaces
45 minutes3 items
6
Apply Paint
120 minutes2 items
7
Apply Second Coat (if needed)
120 minutes2 items
8
Clean the Sprayer
60 minutes4 items
9
Remove Masking and Inspect
20 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.