Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Prepare the Paint

Open the paint can and stir the paint thoroughly. Use a paint strainer to filter the paint into a clean bucket, removing any skin, lumps, or debris that could clog the sprayer. If necessary, thin the paint according to the paint manufacturer's specifications for spray application. Over-thinning can affect the paint's adhesion and finish.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Prepare the Paint

Open the paint can and stir the paint thoroughly. Use a paint strainer to filter the paint into a clean bucket, removing any skin, lumps, or debris that could clog the sprayer. If necessary, thin the paint according to the paint manufacturer's specifications for spray application. Over-thinning can affect the paint's adhesion and finish.

Videos for this step

Paint Preparation (Straining and Thinning)Thin and Filter PaintPreparing the Paint

Tools and Materials

← Project

Painting

Step 2 of 9·7 hr left

Select and Prepare Paint Sprayer
60 minutes2 items
2
Prepare the Paint
30 minutes4 items
3
Load the Sprayer
15 minutes2 items
4
Test Spray Pattern
10 minutes2 items
5
Mask and Protect Surfaces
45 minutes3 items
6
Apply Paint
120 minutes2 items
7
Apply Second Coat (if needed)
120 minutes2 items
8
Clean the Sprayer
60 minutes4 items
9
Remove Masking and Inspect
20 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.