Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 6 · Mount Nest Base

Feed the labeled wires through the center opening of the Nest base (and trim plate, if used). Hold the Nest base against the wall, ensuring it is level. Use the included screws to secure the base to the wall. If mounting into drywall, use the provided wall anchors. Ensure the base is firmly attached and does not wobble.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Mount Nest Base

Feed the labeled wires through the center opening of the Nest base (and trim plate, if used). Hold the Nest base against the wall, ensuring it is level. Use the included screws to secure the base to the wall. If mounting into drywall, use the provided wall anchors. Ensure the base is firmly attached and does not wobble.

← Project

Nest Thermostat Installation

Step 6 of 10·50 min left

Turn Off Power to HVAC System
5 minutes
Remove Old Thermostat
10 minutes
Label Wires
5 minutes
Disconnect and Remove Old Base
5 minutes
Install Nest Trim Plate (Optional)
5 minutes
6
Mount Nest Base
10 minutes
7
Connect Wires to Nest
15 minutes
8
Attach Nest Display
2 minutes
9
Restore Power to HVAC System
3 minutes
10
Nest Thermostat Setup
20 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.