Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Disconnect and Remove Old Base

Once all wires are labeled, carefully disconnect them from the terminals on the old thermostat base. Gently pull the wires through the wall opening. Then, unscrew the old thermostat's base plate from the wall. Allow the wires to gently retract into the wall cavity a short distance to prevent them from falling back completely.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Disconnect and Remove Old Base

Once all wires are labeled, carefully disconnect them from the terminals on the old thermostat base. Gently pull the wires through the wall opening. Then, unscrew the old thermostat's base plate from the wall. Allow the wires to gently retract into the wall cavity a short distance to prevent them from falling back completely.

← Project

Nest Thermostat Installation

Step 4 of 10·1 hr left

Turn Off Power to HVAC System
5 minutes
Remove Old Thermostat
10 minutes
Label Wires
5 minutes
4
Disconnect and Remove Old Base
5 minutes
5
Install Nest Trim Plate (Optional)
5 minutes
6
Mount Nest Base
10 minutes
7
Connect Wires to Nest
15 minutes
8
Attach Nest Display
2 minutes
9
Restore Power to HVAC System
3 minutes
10
Nest Thermostat Setup
20 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.