Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Label Wires

Using the labels provided with your Nest thermostat or small pieces of tape, label each wire according to the terminal it was connected to on the old thermostat (e.g., R, G, Y, W, C). If you don't have labels, you can use small pieces of tape and a pen. Ensure each label accurately corresponds to the terminal designation from your reference photo. This step is vital for ensuring proper communication between the Nest thermostat and your HVAC system.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Label Wires

Using the labels provided with your Nest thermostat or small pieces of tape, label each wire according to the terminal it was connected to on the old thermostat (e.g., R, G, Y, W, C). If you don't have labels, you can use small pieces of tape and a pen. Ensure each label accurately corresponds to the terminal designation from your reference photo. This step is vital for ensuring proper communication between the Nest thermostat and your HVAC system.

← Project

Nest Thermostat Installation

Step 3 of 10·1.1 hr left

Turn Off Power to HVAC System
5 minutes
Remove Old Thermostat
10 minutes
3
Label Wires
5 minutes
4
Disconnect and Remove Old Base
5 minutes
5
Install Nest Trim Plate (Optional)
5 minutes
6
Mount Nest Base
10 minutes
7
Connect Wires to Nest
15 minutes
8
Attach Nest Display
2 minutes
9
Restore Power to HVAC System
3 minutes
10
Nest Thermostat Setup
20 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.