Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Check for Plumb and Level of Treads and Risers

Place a long level across the width of each tread to check if it is level from side to side and front to back. Then, use a level or a plumb bob to check if the vertical face of each riser is plumb (perfectly vertical). Any significant deviations from level or plumb indicate that the stairs may have settled unevenly or were not constructed correctly.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Check for Plumb and Level of Treads and Risers

Place a long level across the width of each tread to check if it is level from side to side and front to back. Then, use a level or a plumb bob to check if the vertical face of each riser is plumb (perfectly vertical). Any significant deviations from level or plumb indicate that the stairs may have settled unevenly or were not constructed correctly.

Videos for this step

Level and Align Installed RiserDiagnose Stair Fit Problems and CausesCheck Tread Level and Stringer Fit

Tools and Materials

← Project

How to Measure Basement Stairs with Uneven Steps

Step 4 of 6·40 min left

Inspect the Stairs for Visible Unevenness
10 minutes2 items
Measure the Rise of Each Step
20 minutes4 items
Measure the Run of Each Step
20 minutes3 items
4
Check for Plumb and Level of Treads and Risers
15 minutes4 items
5
Measure Overall Staircase Dimensions
10 minutes4 items
6
Document All Measurements
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.