Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Mark the Nosing and Final Cut

After marking all the riser and tread lines, you need to account for the nosing, which is the part of the tread that overhangs the riser. Typically, this is about 1 inch. On your last tread mark, measure out the nosing distance (e.g., 1 inch) beyond the last riser line. This will create your nosing line. The final cut at the bottom of the stringer will be determined by this nosing line and the angle of the last tread. This creates the shape of the stringer that will sit flush on the lower subfloor.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Mark the Nosing and Final Cut

After marking all the riser and tread lines, you need to account for the nosing, which is the part of the tread that overhangs the riser. Typically, this is about 1 inch. On your last tread mark, measure out the nosing distance (e.g., 1 inch) beyond the last riser line. This will create your nosing line. The final cut at the bottom of the stringer will be determined by this nosing line and the angle of the last tread. This creates the shape of the stringer that will sit flush on the lower subfloor.

Videos for this step

Correct Straight Stringer LayoutMark Top and Bottom Stringer CutsMark the Stringer Board

Tools and Materials

← Project

How to Lay Out a Stair Stringer with a Framing Square

Step 5 of 6·1 hr left

Determine Total Rise and Run
15 minutes2 items
Calculate Number of Risers and Treads
10 minutes2 items
Calculate Riser and Tread Dimensions
10 minutes2 items
Mark the Stair Stringer with a Framing Square
30 minutes4 items
5
Mark the Nosing and Final Cut
15 minutes3 items
6
Cut the Stair Stringer
45 minutes5 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.