Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Restore Power and Test

Return to the circuit breaker panel and flip the breaker back to the 'ON' position. Wait a few moments for the motion sensor to calibrate if required by the manufacturer. Walk into the area covered by the sensor to test if the light turns on automatically. Verify that the light turns off after the set period of inactivity.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Restore Power and Test

Return to the circuit breaker panel and flip the breaker back to the 'ON' position. Wait a few moments for the motion sensor to calibrate if required by the manufacturer. Walk into the area covered by the sensor to test if the light turns on automatically. Verify that the light turns off after the set period of inactivity.

Videos for this step

Restore Power and Test FunctionalityRestore Power and Test FunctionalityTest Switch Operation

Tools and Materials

← Project

How to Install a Motion-Sensor Light Switch in a Stairway

Step 8 of 8·10 min left

Turn Off Power
5 minutes2 items
Remove Existing Switch Plate and Switch
10 minutes1 items
Identify and Disconnect Wires
10 minutes3 items
Connect Motion Sensor Switch - Line and Load
15 minutes2 items
Connect Ground Wire
5 minutes2 items
Mount the Motion Sensor Switch
10 minutes1 items
Install the Cover Plate
5 minutes2 items
8
Restore Power and Test
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.