Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove Existing Switch Plate and Switch

Unscrew and remove the cover plate of the existing light switch. Then, unscrew the old light switch from the electrical box. Carefully pull the switch out from the box to expose the wiring. Note or take a picture of how the wires are connected to the old switch.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove Existing Switch Plate and Switch

Unscrew and remove the cover plate of the existing light switch. Then, unscrew the old light switch from the electrical box. Carefully pull the switch out from the box to expose the wiring. Note or take a picture of how the wires are connected to the old switch.

Videos for this step

Remove Existing Switch Plate and SwitchRemove Existing Light SwitchRemove Existing Switch and Cover

Tools and Materials

← Project

How to Install a Motion-Sensor Light Switch in a Stairway

Step 2 of 8·1.1 hr left

Turn Off Power
5 minutes2 items
2
Remove Existing Switch Plate and Switch
10 minutes1 items
3
Identify and Disconnect Wires
10 minutes3 items
4
Connect Motion Sensor Switch - Line and Load
15 minutes2 items
5
Connect Ground Wire
5 minutes2 items
6
Mount the Motion Sensor Switch
10 minutes1 items
7
Install the Cover Plate
5 minutes2 items
8
Restore Power and Test
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.