Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Mount the Motion Sensor Switch

Gently fold the connected wires back into the electrical box, ensuring they are not pinched. Align the mounting screws on the new motion sensor switch with the corresponding holes in the electrical box. Screw the switch into place until it is snug against the wall.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Mount the Motion Sensor Switch

Gently fold the connected wires back into the electrical box, ensuring they are not pinched. Align the mounting screws on the new motion sensor switch with the corresponding holes in the electrical box. Screw the switch into place until it is snug against the wall.

Videos for this step

Mount Motion Sensor SwitchMount Switch and Attach FaceplateMount Switch and Adjust Settings

Tools and Materials

← Project

How to Install a Motion-Sensor Light Switch in a Stairway

Step 6 of 8·25 min left

Turn Off Power
5 minutes2 items
Remove Existing Switch Plate and Switch
10 minutes1 items
Identify and Disconnect Wires
10 minutes3 items
Connect Motion Sensor Switch - Line and Load
15 minutes2 items
Connect Ground Wire
5 minutes2 items
6
Mount the Motion Sensor Switch
10 minutes1 items
7
Install the Cover Plate
5 minutes2 items
8
Restore Power and Test
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.