Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 9 · Cool and Clean the Joint

Let the joint cool naturally for several minutes. Do not move or disturb the joint while the solder is solidifying. Quenching the hot joint with a wet rag can shock the metal and cause a stress fracture, leading to a weak joint. Once the joint has cooled enough to be safely handled, use a clean, damp rag to wipe away any remaining flux residue from the exterior of the pipe and fitting. This prevents future corrosion and gives the joint a clean, professional appearance. After all joints are completed and cooled, you can slowly turn the water back on and inspect for leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 9 · Cool and Clean the Joint

Let the joint cool naturally for several minutes. Do not move or disturb the joint while the solder is solidifying. Quenching the hot joint with a wet rag can shock the metal and cause a stress fracture, leading to a weak joint. Once the joint has cooled enough to be safely handled, use a clean, damp rag to wipe away any remaining flux residue from the exterior of the pipe and fitting. This prevents future corrosion and gives the joint a clean, professional appearance. After all joints are completed and cooled, you can slowly turn the water back on and inspect for leaks.

Videos for this step

Cool and Clean the Soldered PipeClean and Cool JointClean the Joint

Tools and Materials

← Project

How to Solder Copper Pipes for a Permanent, Watertight Joint

Step 9 of 9·10 min left

Preparation and Safety
15 mins5 itemsBeginner
Cut the Pipe
5 mins5 itemsIntermediate
Deburr and Ream the Pipe
2 mins1 itemsBeginner
Clean the Pipe and Fitting
5 mins2 itemsIntermediate
Apply Flux
2 mins4 itemsBeginner
Assemble the Joint
1 min4 itemsBeginner
Heat the Joint
2 mins6 items
Apply the Solder
1 min6 items
9
Cool and Clean the Joint
10 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.