Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Apply Flux

Immediately after cleaning, apply a thin, even layer of soldering flux to the cleaned outer surface of the pipe end and the cleaned inner surface of the fitting. Use a small flux brush to apply the paste. The flux serves two purposes: it chemically cleans the copper as it's heated and prevents re-oxidation, allowing the solder to flow smoothly into the joint.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Apply Flux

Immediately after cleaning, apply a thin, even layer of soldering flux to the cleaned outer surface of the pipe end and the cleaned inner surface of the fitting. Use a small flux brush to apply the paste. The flux serves two purposes: it chemically cleans the copper as it's heated and prevents re-oxidation, allowing the solder to flow smoothly into the joint.

Videos for this step

Apply Flux and Wipe ExcessApply FluxClean and Apply Flux

Tools and Materials

← Project

How to Solder Copper Pipes for a Permanent, Watertight Joint

Step 5 of 9·16 min left

Preparation and Safety
15 mins5 itemsBeginner
Cut the Pipe
5 mins5 itemsIntermediate
Deburr and Ream the Pipe
2 mins1 itemsBeginner
Clean the Pipe and Fitting
5 mins2 itemsIntermediate
5
Apply Flux
2 mins4 itemsBeginner
6
Assemble the Joint
1 min4 itemsBeginner
7
Heat the Joint
2 mins6 items
8
Apply the Solder
1 min6 items
9
Cool and Clean the Joint
10 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.