Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Apply the Solder

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once the joint is at the correct temperature, remove the flame. Immediately touch the tip of the lead-free solder to the seam where the pipe enters the fitting. Do not apply the flame directly to the solder. The heat of the pipe and fitting should melt the solder, which will be drawn into the joint by capillary action. Apply solder around the entire joint until you see a continuous, shiny silver ring form. For a 1/2-inch pipe, you will typically use about 1/2 inch of solder. Once the solder has flowed all the way around, remove the solder wire.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Apply the Solder

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once the joint is at the correct temperature, remove the flame. Immediately touch the tip of the lead-free solder to the seam where the pipe enters the fitting. Do not apply the flame directly to the solder. The heat of the pipe and fitting should melt the solder, which will be drawn into the joint by capillary action. Apply solder around the entire joint until you see a continuous, shiny silver ring form. For a 1/2-inch pipe, you will typically use about 1/2 inch of solder. Once the solder has flowed all the way around, remove the solder wire.

Videos for this step

Heat Pipe and Apply SolderSolder the New FittingSolder the New Valve Assembly

Tools and Materials

← Project

How to Solder Copper Pipes for a Permanent, Watertight Joint

Step 8 of 9·11 min left

Preparation and Safety
15 mins5 itemsBeginner
Cut the Pipe
5 mins5 itemsIntermediate
Deburr and Ream the Pipe
2 mins1 itemsBeginner
Clean the Pipe and Fitting
5 mins2 itemsIntermediate
Apply Flux
2 mins4 itemsBeginner
Assemble the Joint
1 min4 itemsBeginner
Heat the Joint
2 mins6 items
8
Apply the Solder
1 min6 items
9
Cool and Clean the Joint
10 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.