Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test the Pump Operation

With the installation complete, it's time to test. Plug the pump's power cord back into the GFCI outlet. Use a hose or buckets to slowly pour water into the sump pit. As the water level rises, it will lift the float switch. When the float reaches its activation height, the pump should turn on with a hum. Watch as it quickly pumps the water out of the pit. The pump should shut off automatically as the float switch drops with the water level. During this test, carefully inspect all the connections, especially around the new check valve, for any signs of leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test the Pump Operation

With the installation complete, it's time to test. Plug the pump's power cord back into the GFCI outlet. Use a hose or buckets to slowly pour water into the sump pit. As the water level rises, it will lift the float switch. When the float reaches its activation height, the pump should turn on with a hum. Watch as it quickly pumps the water out of the pit. The pump should shut off automatically as the float switch drops with the water level. During this test, carefully inspect all the connections, especially around the new check valve, for any signs of leaks.

Videos for this step

Install, Connect, and Test the New PumpTest the sump pumpTest the New Switch

Tools and Materials

← Project

How to Replace a Submersible Sump Pump

Step 6 of 7·25 min left

Disconnect Power and Prepare the Area
10 mins3 itemsBeginner
Disconnect the Discharge Pipe
15 mins4 itemsIntermediate
Remove the Old Pump
10 mins4 itemsIntermediate
Prepare New Pump and Clean Pit
20 mins6 itemsIntermediate
Install New Pump and Connect Piping
30 mins8 itemsAdvanced
6
Test the Pump Operation
15 mins2 itemsBeginner
7
Finalize and Secure
10 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.