Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Apply Thread Seal Tape

Take your new shower arm and the roll of thread seal tape. You will apply tape to the threads on both ends of the arm. For the end that goes into the wall, start at the second thread from the end and wrap the tape tightly in a clockwise direction. This is crucial—wrapping clockwise ensures the tape tightens as you screw the arm in, rather than unraveling. Overlap the tape by about half its width and make 3 to 5 full wraps. Repeat this process for the other end of the arm where the shower head will attach.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Apply Thread Seal Tape

Take your new shower arm and the roll of thread seal tape. You will apply tape to the threads on both ends of the arm. For the end that goes into the wall, start at the second thread from the end and wrap the tape tightly in a clockwise direction. This is crucial—wrapping clockwise ensures the tape tightens as you screw the arm in, rather than unraveling. Overlap the tape by about half its width and make 3 to 5 full wraps. Repeat this process for the other end of the arm where the shower head will attach.

Videos for this step

Apply Teflon TapeApply New Thread TapeApply New Teflon Tape

Tools and Materials

← Project

How to Replace a Shower Head and Shower Arm

Step 5 of 8·15 min left

Gather Tools and Materials
5 mins6 itemsBeginner
Remove the Old Shower Head
5 mins2 itemsBeginner
Remove the Old Shower Arm
5 minsIntermediate
Clean Threads and Flush Pipe
5 mins1 itemsBeginner
5
Apply Thread Seal Tape
5 mins2 itemsBeginner
6
Install the New Shower Arm
5 mins2 itemsIntermediate
7
Install the New Shower Head
2 mins3 itemsBeginner
8
Check for Leaks
3 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.