Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Clean Threads and Flush Pipe

With the arm removed, look into the threaded female fitting in the wall. Use a rag or a small brush, like an old toothbrush, to clean out any old thread seal tape, plumber's putty, or mineral deposits. After cleaning, place a rag over the opening and turn the shower water on for just 2-3 seconds. This will flush out any loose debris that could clog your new shower head. Turn the water off immediately.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Clean Threads and Flush Pipe

With the arm removed, look into the threaded female fitting in the wall. Use a rag or a small brush, like an old toothbrush, to clean out any old thread seal tape, plumber's putty, or mineral deposits. After cleaning, place a rag over the opening and turn the shower water on for just 2-3 seconds. This will flush out any loose debris that could clog your new shower head. Turn the water off immediately.

Videos for this step

Install New Shower Arm and HeadReinstall and FlushRemove Old Shower Arm

Tools and Materials

← Project

How to Replace a Shower Head and Shower Arm

Step 4 of 8·20 min left

Gather Tools and Materials
5 mins6 itemsBeginner
Remove the Old Shower Head
5 mins2 itemsBeginner
Remove the Old Shower Arm
5 minsIntermediate
4
Clean Threads and Flush Pipe
5 mins1 itemsBeginner
5
Apply Thread Seal Tape
5 mins2 itemsBeginner
6
Install the New Shower Arm
5 mins2 itemsIntermediate
7
Install the New Shower Head
2 mins3 itemsBeginner
8
Check for Leaks
3 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.