Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Disconnect the Faucet Supply Line

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Using an adjustable wrench, turn the nut that connects the faucet supply line to the top of the angle stop counter-clockwise. A small amount of water will drain from this line into the bucket below. Once the nut is loose, fully disconnect the supply line and move it out of the way.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Disconnect the Faucet Supply Line

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Using an adjustable wrench, turn the nut that connects the faucet supply line to the top of the angle stop counter-clockwise. A small amount of water will drain from this line into the bucket below. Once the nut is loose, fully disconnect the supply line and move it out of the way.

Videos for this step

Disconnect supply linesDisconnect Supply Lines from ValvesDisconnect Supply Lines from Faucet

Tools and Materials

← Project

How to Replace a Leaky Angle Stop (Shutoff Valve) Under Your Sink

Step 4 of 9·55 min left

Gather Tools and Prepare Work Area
10 mins5 itemsBeginner
Shut Off Main Water Supply
5 minsIntermediate
Drain the Line
5 mins2 itemsBeginner
4
Disconnect the Faucet Supply Line
5 mins3 itemsIntermediate
5
Remove the Old Angle Stop
15 mins3 items
6
Clean and Prepare the Pipe
5 mins2 itemsBeginner
7
Install the New Angle Stop
10 mins3 itemsAdvanced
8
Reconnect the Faucet Supply Line
5 mins2 itemsIntermediate
9
Turn Water On and Test for Leaks
15 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.